冷热冲击试验箱_快速温变恒温恒湿实验箱_三槽高低温冲击测试箱厂家
热门搜索: 快速温变试验箱 高低温老化试验箱 淋雨试验箱 UV紫外线老化试验箱 三综合试验箱 pct老化试验箱 砂尘试验箱 振动冲击试验台 氙灯老化试验箱 恒温恒湿试验箱
pct老化试验箱
氙灯老化试验箱
恒温恒湿箱
三综合试验箱

冷热冲击试验箱ASTM D4811标准介绍

2018-12-25

本页面标准信息均来源于网络收集,或由参与标准制定的供应商提供,只作为参考使用,为确保测试结果的准确性、节省您的时间,如需ASTM D4811标准详细信息或ASTM D4811具体测试方法,欢迎与我们技术人员联系或给我们留言,我们将为您相关的技术支持。


ASTM D4811标准介绍

ASTM D4811简介

ASTM D4811是用作屋面防雨板的非硫化(未固化)橡胶薄板的标准规范:

本规范规定了由EPDM(乙烯丙烯三元共聚物)或CR(氯丁橡胶)制成的、拟用于防水屋面防雨板的非硫化(未固化)橡胶薄板在空气中的曝露测试。


ASTM D4811英文简介


1. Scope

1.1 This specification covers nonvulcanized (uncured) rubber sheet made of EPDM (ethylene-propylene-diene terpolymer) or CR (polychloroprene) intended for use as watertight roof flashing exposed to the weather.

1.2 The tests and property limits used to characterize these flashing materials are specific for each classification and are minimum values to make the product fit for its intended purpose.

1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.4 In-place roof system design criteria, such as fire resistance, field seaming strength, material compatibility, and uplift resistance, among others, are beyond the scope of this specification.

1.5 The following precautionary caveat pertains to the test methods portion only, Section 8, of this specification: This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address the safety concerns associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


2. Referenced Documents

ASTM Standards

D412 Test Methods for Vulcanized Rubber and Thermoplastic Elastomers--Tension

D471 Test Method for Rubber Property--Effect of Liquids

D518 Test Method for Rubber Deterioration--Surface Cracking

D573 Test Method for Rubber--Deterioration in an Air Oven

D624 Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers

D1079 Terminology Relating to Roofing and Waterproofing

D1149 Test Methods for Rubber Deterioration--Cracking in an Ozone Controlled Environment

D1204 Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature

D1418 Practice for Rubber and Rubber Latices--Nomenclature

D2137 Test Methods for Rubber Property--Brittleness Point of Flexible Polymers and Coated Fabrics

D3182 Practice for Rubber--Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets

G151 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

G154 Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials

G155 Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials


▼ASTM D4811第三方检测机构

以上标准信息来自互联网搜索整理,如需了解完整的ASTM D4811的信息或ASTM D4811标准解读,欢迎详询。

Copyright © 广东艾思荔检测仪器有限公司. All Rights Reserved 站点地图(XML) 站点地图(HTML) 粤公网安备 44190002001125号 备案号:粤ICP备09006556号-55
在线客服
售后咨询
拨打电话
发送邮件