Thermal Shock Test Chamber Manufacturer ,Vibration Shaker,Xenon Chamber , High Low Temperature Chamber Factory
Hot search: High low Temperature Cycle Test Chamber UV Climate Resistant Aging Test Chamber Temperature Humidity Vibration Combined Test System HAST Impact Test Vibration Tester Temperature Humidity Test Chamber Thermal Shock Test Chamber
PCT Aging testing chamber
Xenon aging test chamber
Temperature Humidity test chamber
Temperature Humidity Vibration combined test system

Customized Thermal Shock Test Chamber

Customized Thermal Shock Test Chamber

    Customized Thermal Shock Test Chamber



    Customized Thermal Shock Test Chamber is used to test the capability of material structure or composite materials to withstand the continuous environmental changes between extremely high temperature and low temperature during a short period, and therefore understand the chemical changes or physical damages caused by expansion from heat and contraction from cold in the shortest possible time.


    Technical Parameters:

    Model

     TS-49(A~C)

    TS-80(A~C)

    TS-150(A~C)

    TS-252(A~C)

    TS-450(A~C)

    TS-900(A~C)

    Internal Dimension WxHxD (mm)

    400x350x350

    500x400x400

    600x500x500

    700x600x600

    800x750x750

    1000x900x900

    External Dimension WxHxD (mm)

    1400x1800x1400

    1550x1950x1550

    1600x2000x1700

    1700x2100x1750

    1800x2200x1900

    2100x2400x2200

    Temperature Range of Testing zone

    Type A:-40 ℃~+150℃ ( 200℃ is Optional)

    Type B:-55℃ ~+150℃ ( 200℃ is Optional )

    Type C:-65℃ ~+150℃ ( 200℃ is Optional)

    High temperature Range of Testing zone: +60ºC~+150ºC ( 200ºC is Optional);

    Low Temperature Range of Testing Zone: -10ºC~-40ºC / -55ºC / -65ºC

    Exposure Time of High/Low Temperature

    Exposure Time of High Temperature: +60℃ ~ +150℃ (200℃ is Optional) 30Mins

    Exposure Time of Low Temperature : -10℃~Type A:-40℃ / Type B -55℃ / Type C -65℃ 30Mins

    Temperature of Heat-Storing Slot / Heating Time

    RT~200℃/About  45mins

    Temperature of Cool-storing Slot / Cooling Time

    RT~-75℃/ About 100mins

    Temperature Recovery Time / Conversion Time

    ≤5min/≤5sec  

    Control Accuracy / Distribution Uniformity

    ±0.5℃/±2℃

    Internal and External Material

    Material of the inner box is SUS 304# stainless steel,of the outer box is stainless steel or see cold-rolled steel with paint coated.

    Insulation Material

    High temperature resistant , high density , formate chlorine , ethyl acetum foam insulation materials

    Mechanics

    P.I.D+S.S.R+ Micro-computer balanced temperature control system

    Cooling System

    Semi-hermetic double-stage compressor(water-cooled type) /Hermetic double-stage compressor (air-cooled type)

    Security Protection Devices

    Non-fuse breaker, high and low pressure protective switch of the compressor , refrigerator high-pressure protective switch , failure warning system, electronic alarm

    Accessories

    viewing window(special order)

    Compressor

    French 'Tecumseh' Brand, Germany Bizer Brand

    Power

    AC220V 1 phase 3 lines ,50/60HZ, AC380V 3 phase 5 lines ,50/60HZ

    Weight (Approx)

    450 Kg

    600 Kg

    750 Kg

    900 Kg

    1300 Kg

    1500 Kg




    Features: 
    1.It is divided into three zones: high temperature zone, low temperature zone, and testing  zone. The test sample is in static mode.
    2.Using touch-control graph control as operation interface, easy to operate.
    3.Applying wind route conversation to the shock method to distribute temperature to the testing zone for cold and thermal shock measurement.
    4.For high temperature shock or low temperature shock, max. time is up to 999H, and max. circulation cycles are 9999 times.
    5.The system can be used for automatic Circulation Shock or manual selective shock.
    6.Adopt binary cooling system, with quick cooling effect. Cooling method is water cooling.
    7.Can entering normal temperature. RS-232 and RS-485 communication.


    Saftey device:
    1 Cooling System: Compressor heat loading or cold over loading warming
    2 Testing room: Testing room and Humidifier temperature over loading warming.  
    3 Others: Leakage protection. Heating, dry protection. Overload, short circuit protection.Power protection.

    Testing Specific:
    GB/T 2431.1-2001  Testing A: Low temperature testing method
    GB/T 2431.2-2001  Testing B: High temperature testing method
    GJB 150.3-1986: High temperature
    GJB 150.4-1986: Low temperature
    IEC68-2-1 Test A: Cold
    IEC68-2-2 Test A: Dry
    GB 11158 High and low temperature test term
    GB/T 2423.2  << Electrolic products basic environmental test: B: high temperature method>>

Copyright © ASLi (CHINA) TEST EQUIPMENT CO., LTD. All Rights Reserved Site map
Online service
After sales
Call
E-Mail