Thermal Shock Test Chamber Manufacturer ,Vibration Shaker,Xenon Chamber , High Low Temperature Chamber Factory
Hot search: High low Temperature Cycle Test Chamber UV Climate Resistant Aging Test Chamber Temperature Humidity Vibration Combined Test System HAST Impact Test Vibration Tester Temperature Humidity Test Chamber Thermal Shock Test Chamber
PCT Aging testing chamber
Xenon aging test chamber
Temperature Humidity test chamber
Temperature Humidity Vibration combined test system

(HAST)Highly accelerated stress test

(HAST)Highly accelerated stress test

    (HAST)Highly accelerated stress test

    (HAST)Highly accelerated stress test chamber is widely applied to the testing of sealing property for multi-layer circuit board, IC sealing package, LCD screen, LED, semi-conductor, magnetic materials, NdFeB, rare earths and magnet iron, in which the resistance to pressure and air tightness for above mentioned products can be tested out.

    Safety device:
    1. Safety device for the pot: If the inner box is not closed , the machine can not start
    2. Safety Valve: When the inner box's pressure higher than the machine's undertake value, it will self-relieve.
    3. Double overheat protection device: When inner box's temperature is too high, it will alarm, and Automatic cut off the heating power.
    4. Cover protection: The inner box's cover is made of aluminum alloy, can protect the worker from scald.

    1.Automatic adding water function, and automatic filling water upon the water short storage while testing.
    2.Automatic operation to test process finished, easy to use.
    3.Temperature control: LED digital temperature controller can make accurate testing of temperature setting, control and display.
    4. LED digital timer, when the inner box's temperature reached the setting value, then start to time to ensure the test complete.
    5.Accurate pressure: temperature chart always shows the inner box's pressure and relative humidity.
    6.Water device is automatically discharge not saturated steam in order to achieve the best steam quality.
    7.A integrated silica gel door gasket, air tightness is very good, and long operation life.
    8.The inner box is mirror-polished , graceful and non-pollution

    Technical Parameters:

    Internal Dimension
    Φ×D (mm)
    300×250 350×450 450×550 550×650 650×750
    External Dimension
    Φ×D (mm)
    850×1300×900 900×1350×900 1000×1480×1000 1150×1650×1200 1300×1800×1350
    Steam Temperature Range Steam Temperature Range: 100℃~135℃, (143℃ is optional)
    Relative Pressure/
    Absolute Pressure
    Relative pressure:  display values  indicated on the  pressure gauge
    Absolute pressure: Value that add 100 Kpa based on display values indicated on the  pressure gauge
    (The actual value in the inner box)
    Comparison Table of
    Temperature, Humidity,
    Steam Humidity 70~100%R.H. steam humidity adjustable
    Steam Pressure
    (Absolute Pressure)
    101.3Kpa +0.0Kg/cm2~2.0Kg/cm2 ; (3.0Kg/cm2  is special standard)
    Recursive Device Steam in forced-circulation
    Safety Protective Devise Water short storage protect, over pressure protect.(have automatically/manual water replenishing, automatically discharge pressure function )
    Accessories Two layers  stainless steel plate
    Equipment Capacity(L) 17 43 87 155 250
    Powder AC220V, 1∮ 3  Lines ,50/60HZ;    AC380V ,3∮ 5 Lines,50/60HZ

Copyright © ASLi (CHINA) TEST EQUIPMENT CO., LTD. All Rights Reserved Site map
Online service
After sales